Vertical Electric Tensile Testing Machine

XL-LD50Vertical Electric Tensile Testing Machine

Description:

The Terminal Tensile Testing Machine consists of a tensile machine base and a dynamometer; it is used to test the tensile force of samples. The tensile value is directly displayed on the dynamometer, and the reading is taken directly from the gauge after breakage. This machine can be equipped with either a digital display gauge or a pointer gauge. The digital display gauge offers high precision and intuitive testing, while the pointer gauge provides accurate readings via the dial. The machine is easy to operate, user-friendly, and simple to learn.

Parameters:

Force Value: 50kg (maximum load capacity of the machine).

Stroke: 300MM, adjustable within this range, with automatic stop at the upper and lower limits.

Upper Plate: Fixes the upper fixture. The stroke of the upper and lower fixtures can be adjusted arbitrarily using the limit knobs (located on the right side of the machine).

Lower Fixture: Fixes the lower fixture, adjustable in all directions (front, back, left, right).

Speed: 10 ~ 350 MM/MIN, adjustable.

Control Mode: Up / Stop / Down.

Dynamometer Parameters:

Force Sensing: Mechanical push-pull dynamometer and electronic push-pull dynamometer (50 kg, customer's choice).

1) NK Series Mechanical Push-Pull Dynamometer: Features such as peak hold.

Capacity: 1 kg/5gf; 2/10gf; 5/25gf; 10/50gf; 20/100gf; 50kg/250gf (choose one)

Unit: kg / N readable.

2) FGN / RFG Series Electronic Push-Pull Dynamometer: Features such as peak hold (Japan).

Capacity: 1 kg /0.1gf; 2, 5, 10/1gf; 20, 50kg/10gf (choose one).

Unit: kg / N optional.